Are you and AirFit F30 a match?

sleep-apnea-cpap-masks-mouth-breather-icon

I breathe through my mouth when I sleep

sleep-apnea-cpap-masks-claustrophobic-icon

I can get a little claustrophobic

sleep-apnea-cpap-masks-tv-icon

I watch TV in bed

Product highlights

  • Perfect if you wear glasses, watch TV in bed or sleep on your side
  • A study showed all 75 participants found that it provided a reliable seal 1 Source: ResMed AirFit F30 fitting study of 75 patients conducted from April to May 2018 in multiple US locations. Study evaluated AirFit F30 fitting range and sizing strategy and tested ResMed AirFit F30 against Phillips Respironics Amara View (both masks are minimal-contact, full face). Amara View and Philips are trademarks of Koninklijke Philips N.V, registered in the US and other countries.
  • Magnetic clips mean two simple snaps and your mask is on or off
  • Quick-release elbow allows you to get up at night and disconnect without removing the mask
  • The AirFit F30’s QuietAir™ vent gently diffuses exhaled air to minimise noise and inconvenience. At just 21 dBA, QuietAir technology makes it one of our quietest mask.
icon-eyebrow-information-white

“The design leaves most of the face free and is very elegant.” 1 Source: ResMed AirFit F30 fitting study of 75 patients conducted from April to May 2018 in multiple US locations. Study evaluated AirFit F30 fitting range and sizing strategy and tested ResMed AirFit F30 against Phillips Respironics Amara View (both masks are minimal-contact, full face). Amara View and Philips are trademarks of Koninklijke Philips N.V, registered in the US and other countries.

A streamlined full face mask

If you're looking for a full face mask that's smaller and more modern yet still reliable, AirFit F30 may be right for you. Its UltraCompact cushion rests under your nose rather than over it, covering less of your face, and making it feel more open. This unique design also prevents discomfort that can sometimes happen when the mask rests against the top of your nose. 1 Source: ResMed AirFit F30 fitting study of 75 patients conducted from April to May 2018 in multiple US locations. Study evaluated AirFit F30 fitting range and sizing strategy and tested ResMed AirFit F30 against Phillips Respironics Amara View (both masks are minimal-contact, full face). Amara View and Philips are trademarks of Koninklijke Philips N.V, registered in the US and other countries.

icon-eyebrow-documents-white

Documents center

AirFit F30 size guide

AirFit F30 user guide

icon-eyebrow-play-white

How-to videos

sleep-apnea-airfit-f30-how-to-assemble-your-cpap-mask
sleep-apnea-airfit-f30-how-to-fit-your-cpap-mask
sleep-apnea-airfit-f30-putting-on-a-cpap-mask-over-long-hair
sleep-apnea-airfit-f30-connecting-to-your-cpap-therapy
sleep-apnea-airfit-f30-daily-cpap-mask-cleaning
sleep-apnea-airfit-f30-weekly-cpap-mask-cleaning
sleep-apnea-airfit-f30-managing-cpap-mask-leaks
sleep-apnea-airfit-f30-inspecting-your-cpap-mask-for-wear
sleep-apnea-global-male-and-female-genders-illustration

6 in 10 CPAP patients say they sleep better after replacing their supplies. 2 Source: Based on a third-party, independent study commissioned by ResMed in February 2017, surveying 400 patients currently using CPAP for 6 or more months.

icon-eyebrow-question-mark-black

Frequently asked questions

I'm having issues with my CPAP mask and need help. Who should I contact?

The CPAP equipment provider – the store where you picked up your CPAP mask and device – is responsible for providing you with ongoing clinical support, including answering any questions and helping you resolve any mask comfort or fitting issues that you may be experiencing. Getting used to a mask can be challenging and there may be a different mask option that will work better for your personal comfort needs, so don't hesitate to reach out!

Not sure who your CPAP equipment provider is? We can help,fill out our Contact Us form or simply use our Chat Bot.

How do I clean my mask and how often should I clean it?

You should clean the elbow, frame and cushion daily. The headgear only requires weekly cleaning. Facial oil and dirt can easily build up on your mask parts when they're not cleaned properly, which can lead to skin irritation. The good news? Cleaning your mask doesn't take long, so working it into your morning routine should be a breeze.

HOW TO CLEAN YOUR HEADGEAR

Time it takes: 5 minutes

Supplies you'll need to clean your mask:

  1. Sink or tub
  2. Warm, drinking-quality water (86°F / 30°C)
  3. Mild or hypoallergenic soap, or baby shampoo
  4. Towel

Step-by-step cleaning tips:

  1. Unplug your CPAP device from the power source and disconnect your mask/tubing from your device.
  2. Disassemble your mask:
    • Undo the fastening tab on the upper headgear straps, pull the straps out of the frame and keep the magnetic clips attached to the lower headgear straps.
    • Remove the elbow from the mask by pressing the side button and pulling the elbow away.
    • Hold the top and bottom of the cushion and pull it away from the frame.
  3. In the sink, clean your mask parts by gently rubbing (or using a soft-bristle brush) with warm, drinking-quality water and soap. Avoid harsh cleaning products and dish detergents.
  4. Rinse again thoroughly with warm, drinking-quality water.
  5. Place mask components on the towel and allow to air-dry away from direct sunlight.

Can I use an ozone device to clean my ResMed mask?

Use of ozone may discolor a ResMed mask during the ResMed limited warranty period and that will not be covered. Discoloration of ResMed masks is only covered during the limited warranty period if it occurs upon initial unpackaging.

How often should I replace mask parts and can I sign up for a replacement program?

It's important to take regular care of your CPAP equipment – especially the various mask parts, which can be affected by dirt, oil and residue from your skin. Poorly cleaned CPAP masks can cause discomfort and skin irritation. The last thing we all need is another to-do item, so contact your CPAP equipment store and ask if they have a replacement supply program that you can enroll in to get new parts on a consistent schedule.

Why is the AirFit F30 mask cushion made from silicone material?

Most CPAP masks have silicone cushions because it's a hypoallergenic material that's soft, lightweight and allows for a stable, comfortable seal on your face while you're sleeping. It's important that you decide what's most comfortable for you and your therapy when it comes to your mask cushion. If you experience skin irritation or are uncomfortable with your current mask, contact your CPAP equipment store.

Register your products

By registering you'll receive smart tips on getting started and how to clean and maintain your equipment, reminders to replace your parts, product updates and more.

Where to buy

Find a CPAP store near you or online retailer where you can buy AirFit F30.

icon-eyebrow-compass-black

Keep exploring

CPAP supplies and part replacement

Learn how to get the most out of therapy with regular replacement.

Cleaning CPAP equipment

Learn how to clean your equipment for optimal therapy performance. 

Sign up for myAir

Receive your daily sleep score, tips and coaching.

References

1

Source: ResMed AirFit F30 fitting study of 75 patients conducted from April to May 2018 in multiple US locations. Study evaluated AirFit F30 fitting range and sizing strategy and tested ResMed AirFit F30 against Phillips Respironics Amara View (both masks are minimal-contact, full face). Amara View and Philips are trademarks of Koninklijke Philips N.V, registered in the US and other countries.

1

Source: ResMed AirFit F30 fitting study of 75 patients conducted from April to May 2018 in multiple US locations. Study evaluated AirFit F30 fitting range and sizing strategy and tested ResMed AirFit F30 against Phillips Respironics Amara View (both masks are minimal-contact, full face). Amara View and Philips are trademarks of Koninklijke Philips N.V, registered in the US and other countries.

2

Source: Based on a third-party, independent study commissioned by ResMed in February 2017, surveying 400 patients currently using CPAP for 6 or more months.